產品資訊/USB Storage Series

> USB 2.0 to IDE Controller - 2272
> USB Flash Disk Controller - 2172
> USB 2.0 to IDE Controller - 2118
> USB 2.0 Flash Disk Controller - 2168


OTi-2172 USB Flash Disk Controller

The OTi-2172 is a cost-effective and high-performance USB2.0 Mass Storage Class Peripheral controller targeted for application of USB Flash Dicks. The design complies with USB High Speed Specification (480MB/s), Version 2.0.

The OTi-2172 accommodates up to 8 Flash devices, with any mix of different densities, on the same PCB. It works with comprehensive Flash memory technologies (SLC, MLC, and AG-AND) available on the market. Please refer to the Flash Support List of OTi USB Flash Disk Controllers for detailed information.

The Controller has write-protect capability to prevent writing data to Flash. The controller has one LED control pin. You can program one of the display modes-operation, suspend, and standby, through the production program provided by OTi. Value-added application software for security and data management is also available.

This controller can operate on Win XP, Win 2000, Windows ME, and Mac OS without any driver installation.

This OTi-2172 is available in cost-saving 48-pin LQFP (7mm x 7mm) package.

 

Features

● Mass storage class control with Universal Serial Bus interface
● USB Specification Compliance
    - Conforms to high-speed (480MB/s) USB Specification, Version 2.0
    - Meet bus power specification
● Integrated USB transceiver
    - Dynamic feedback control
    - Stable slew rate, independent of external loading
● Integrated USB Serial Interface Engine (SIE)
● Integrated RISC micro-control
    - High-performance RISC architecture
    - Single cycle instruction execution
● 12 MHz external clock
● 3.3 V power operation
● Internal power on reset function
● Integrated PLL
● Support up to 8 pieces of NAND Flash memory with write-protected ability
● Support Toshiba and Samsung’s K9K series flash
● Support Micron 0434-29F2G08AAA and 0434-29F2G08AAB flash
● Support ST’s and Hynix’s 3V NAND series flash
● Support Hynix’s HY27UG082G2M flash
● Support wear-leveling algorithm
● Higher reliability: ECC on the fly
● Automatic bad block management
● Supports OS:
   Win XP, Win 2000, Windows ME, Linux 2.4 above, and Mac OS 9.0 or higher 
   Win 98/Win98SE driver available
   Mac 8.6 mass storage driver available for Apple
   Multiple LUN Windows driver is available
● Support Auto-Run feature
● Configurable Vendor ID/Product ID (VID/PID)
● Small form factor – standard 48-pin TQFP and LQFP (7mm x 7mm) package

 

 

 

 回到上層


服務條款 | 隱私權聲明

© 2006 Ours Technology Inc. All rights reserved